How does the cement tank of concrete mixing station have a long service life

The cement silo has a cylindrical structure, and the bottom is supported by four round tube legs. The whole silo is

in the form of steel structure and welded; the top is provided with a dust collector and a pressure safety valve.

When the cement silo is working, it is erected by a special crane and then placed on the pre-prepared concrete

foundation for firm welding. Therefore, the cement silo is a fixed tank when it is used, and the output of the

material must pass through the discharge port strictly. . Therefore, it is important to ensure the smoothness of the

discharge opening. To ensure unobstructed unloading of the cement silo, it is necessary to ensure that the

material conveyed into the cement silo is dry. Otherwise, stones will be formed in the tank body, which will affect

the unloading of the cement silo. Bulk materials stored in the silo warehouse should be inspected at ordinary

times. Check whether the cement silo is well sealed, if there is any air leakage, etc. If the abnormality is found to

be treated in time, the problem will be prevented from expanding. Each time the cement silo is cleaned, the

cement silo must be dried to prevent the material from getting wet. When it is required to discharge, first open

the manual discharge valve at the bottom of the cone and then transport the cement through the cement

conveyor. In the process of discharging, if the phenomenon of “arching” occurs, press the button of the

electromagnetic valve of the arching device in time to blow the air, eliminate the “arching” and feed, and ensure

the smooth supply of cement. More technical knowledge exchange welcome to pay attention to this site update

Tel:0086-18437125333/0086-371-86598800

Fax:+86-371-86599393

Address:West 200m of Guangwu Road and G310 National Way intersection, Xingyang-Zhengzhou City, Henan Province, 450100 China

WeChat:18437125333